Grout Cleaning: How to Effectively Clean Bathroom Grout

Effective Ways to Clean Bathroom Grout

You stepped inside your bathroom, intent to begin the day right. But just as you finish your daily routine, your eyes catch sight of your bathroom grout. And as you take notice, you realize that your tiles need cleaning and even ask yourself how to effectively clean bathroom grout. 

What is bathroom grout?

Tile grout is used to bind and bond the joints between your tiles. It is the glue that holds your tiles together.

It is a viscous liquid to cover the gaps between the tiles after fastening your wall or floor tiles to the desired surface. Once dried, the liquid concrete created by the grout will hold the tiles in place.

Grout is porous, making it prone to the accumulation of dirt and moisture. Prevent mold and mildew growth by thoroughly cleaning your tile and grout. The moment your grout gives up, so will your tiles.

Identify types of grout.

Below are different types of grout:

• Sanded

Sanded grout is made of cement with grit that can be seen and felt. Tilers use sanded grout for wider joints and are good for floors with high traffic.

• Unsanded

Grout is made of cement sans grit. It's recommended for thinner joints. In addition, it's easier to clean and work with it. Unlike sanded grout, you can also use it for vertical surfaces and polished stones.

• Epoxy

This type of grout is more resistant to water stains than cement grout. They have a lower tendency to shrink or sag. It is stronger and works well in abrasive situations such as shower surrounds and kitchen backsplashes.

Cleaning the tile

You may clean typical grout stains in the same manner. You can spray a cleanser directly onto the grout or a sponge, cloth, or bush to apply it. Let the cleanser sit, and scrape the area with a brush.

• Use water

Try streaming the grout with a pointed nozzle from a steam cleaner if you have one on hand. A steam cleaner will aid in the removal of the dirt before proceeding. Use warm water, a brush with firm bristles, and some elbow grease—a tried-and-tested formula commonly used for ideal tile grout cleaning.

Release the grout buildup in your tile grout with a circular motion, and make the rest of the cleaning process easier. However, this does not put stop mildew from resurfacing.

• Baking soda

Baking soda is a natural option. First, use a bristles brush and scrape the grout. Next, combine two teaspoons of baking soda with water to create a thick paste. Once completed, cover the grout and spray with a solution of equal parts water and white vinegar.

The mixture of baking soda and the water-vinegar solution will produce bubbles. Carry out the procedure once more if the procedure does not clean the grout. Enhance the scrub mix by substituting water with hydrogen peroxide.

• Lemon

Make a paste using the following ingredients:

• ¼ cup of borax
• ½ teaspoon lemon oil
• Liquid soap one enough to clean bathroom tile and grout

Apply the paste to the grout, and work the mixture into the grout using a brush with strong bristles in a circular motion before rinsing with warm water.

• Bleach

Another solution to remove deep-seated stains and filth is bleach. Prepare your bathroom before starting the procedure. Ensure your bathroom has adequate ventilation; only use bleach to clean your white grout.

Spray the diluted bleach on your grout to scrub the tile grout with an old toothbrush, then rinse it afterward.

Spring cleaning is not easy because you are dealing with the mess left behind by winter. However, when you start cleaning, you should know what to do; you have somewhere to begin.

Call for Professional Help

If you are still at a loss and do not know how to effectively clean bathroom grout, you should leave the cleaning to a professional.

Effly is a cleaning service provider in Australia that provides spring cleaning services. You can check out more about Effly and its services through its website.